Sherid single shaft
شایگان صنعت
- Single shaft shredder machine:
- This machine is used to crush all kinds of soft, hard and ultra-hard plastics (plastic cones), all kinds of plastic barrels, inflatable barrels, plastic pallets, and wooden pallets.
Two shaft shredder machine
شایگان صنعت
- Two shaft shredder machine
- This device can cut passenger and truck tires and convert them into sizes below 10 cm
- The insert blades can be sharpened and their long life reduces maintenance costs.
Feeder device
شایگان صنعت
- Feeder device:
- This device injects the pieces of tires removed from the shredder into the grinding device.
- The adjustable speed and load injection of this machine made it possible to control the added shocks to the grinding machine and the equipment to continue working with the highest efficiency and in the most normal state.
Rubber grinding machine (decomposing machine)
شایگان صنعت
- Metal and magnet grinder and separator
All the parts of this machine that are directly connected to the machine are covered with special anti-wear steel armor so that the body of the machine does not wear out over time.
- The bearings of this device are completely separated from the place where the tires are crushed to prevent damage to the bearings and bearings and heating.
- The two-sided and sharpenable blades and the anti-wear blinds and the mentioned capabilities have caused the maintenance costs to be significantly reduced.
- This device is suitable for wired truck tires and wired rides.
Rubber grinding machine (decomposing machine)
شایگان صنعت
- Metal and magnet grinder and separator
- All the parts of this machine that are directly connected to the machine are covered with special anti-wear steel armor so that the body of the machine does not wear out over time.
- The bearings of this device are completely separated from the place where the tires are crushed to prevent damage to the bearings and bearings and heating.
- The two-sided and sharpenable blades and the anti-wear blinds and the mentioned capabilities have caused the maintenance costs to be significantly reduced.
- This device is suitable for wired truck tires and wired rides.
Granule machine
شایگان صنعت
- This device is responsible for breaking down the rubber and yarn scraps and sizing the output granule.
- The output of the material in this machine can be adjusted in such a way that it is possible to produce granules with a size of 3 mm to 10 mm according to the demand of the market.
- The blades of this device are made of steel with special treatment and can be sharpened again.
The body of the device is double-walled and is kept cool by water.
- The bearings of this device are separated from the place where the rubber is crushed and outside of it to prevent damage to the bearings and bearings and its heating.
Thread separator machine
شایگان صنعت
- The task of this machine is to separate the thread from the granule, so that the output of the granulator enters this machine and the granule and thread are separated with high purity.
Granule sorting and separating machine
شایگان صنعت
- This device separates the mixed granules from each other, the output sizes are (0-1)-(1-3)-(3-6) mm, and the output sizes can be changed according to the demand.
Cyclone device
شایگان صنعت
- This device receives the output material from the thread separator and the central fan and dust collector and takes it out in a weighted form so that it can be easily packed and the working environment is not polluted.
Cooling tower device
شایگان صنعت
- Colink Tower device
This device controls the temperature of the equipment.
Dust collection system
شایگان صنعت
- Dust collection system:
This device receives the dust from the crushed materials and transfers it to the cyclone device.
Material transfer system
شایگان صنعت
- Material transfer system:
A total of mobile devices and conveyors to transfer the produced products to different points of the line
Truck tire guillotine
شایگان صنعت
- This machine is for cutting wire tires of trucks whose rims have already been removed
The blades of this device are four-edged, after one edge is slowed down, the other edges can be used and after the four edges are slowed down, it can be sharpened again, which reduces maintenance costs. slow
Wire pulling device
شایگان صنعت
- This device is designed to remove the wires from the wire truck tires and has two jacks that can remove more wires from the tire in the shortest time.
- The hooks and plates of the molds are made of steel with a special operation, which can be repaired and replaced.
- These features make maintenance costs significantly lower.
